Tag Archives: Windows 8

Fixing Windows 8.1 Boot by Create EFI System Partition Manually

I had made a mistake on my laptop OS configuration, which turned out wasted me 3 hours to research and fix the issue.

My laptop has a 256GB SSD disk on its SATA slot and has Windows 8 OS on it. I decided to install a separate copy of Windows 8.1 on a new 128GB MSATA disk and retire the 256GB SSD. And for make the migration easier, I installed the Windows 8.1 along with Windows 8 OS, which was a big mistake.

The boot loader for the new OS is still on the old 256GB disk. And it can make the dual boot perfectly, so I did not realized there is no boot loader on my new SSD. Then things broken up after I remove the 256GB disk as planned, as there was no boot loader on the 128GB disk and there was no EFI partition on it. The whole disk was assigned to a single primary partition with Windows 8.1 OS installed on it.

I have tried using Windows 8.1 installtion disk to make a auto-fix, but it failed. I guess the reason was simply because no EFI partition found on disk.

According to this article and this article, what I had missed were two special partitions, the System and MSR partition:

The solution came out for my problem is to shrink my Windows partition, create the two system partitions manually, then install EFI boot loader to the system partition.

Steps I have taken:

1. Boot with setup disk and enter rescue command prompt, run diskpart.exe, select disk then select my windows volume. Issue a shrink command as:

shrink desired=600

run ‘list disk’ again, now I can see I have 600MB free space on the disk.

2. Then create  and format the EFI partition:

create partition efi size=260
format quick fs=fat32 label="System"

create partition msr size = 128

3. Finally follow this post, run:

bootrec /fixboot
bcdboot c:\Windows /s b: /f ALL

to fix boot record.

4. Lastly for those who enabled hyper-v, run:

bcdedit /set {default} hypervisorlaunchtype Auto
bcdedit /set {default} nx OptIn

5. Reboot and my Windows 8.1 comes back.

Looking into my partition layout, the System partition (EFI boot partition) is on the tail of the disk. It looks wired but works.

System Partition  -Disk Management

 

To make further configuration to Recovery Image, see references below:

在联想昭阳K29 Windows 8上安装Power Manager电源管理软件

方法来自这里:http://forum.51nb.com/thread-1289037-1-1.html
要点是:
1 安装.Net Framework 3.5 – 在添加Windows Feature里面做
2 安装电源管理驱动,可以直接在K29的支持下载页面找到
3 安装电源管理软件,这个在K29的下载页面里面没有。需要安装上面帖子中的版本:http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu410ww.exe 。 而且要注意解开压缩包后,手工设置Setup.exe的兼容性选项到Windows 7,这样执行才可以装好。

Lenovo Power Manager on K29
Lenovo Power Manager on K29